“The BioDrill really changes my Rapid, almost like a new seed drill“
Accessories Rapid 300-400C/S
Pivot packer 4/6 wheel
- Categories 2 (28x825mm) & 3 (36x965mm)
- Allows uniform soil consolidation along the whole working width
- Pivoting prevents bulldozing
- Important on cultivated land due to uneven surface before drilling
- Reduces turning radius
- Extension => 6 wheels for increased carrying capacity on light soil
Gateway + (ISOBUS)
- Possible to upgrade to the most modern control system available on the market, E-Control
- Increases user friendliness and adds functionality
AutoCheck
- It avoids change in drilling depth between full and empty hopper that may otherwise appear due to the weight of the machine
- Field should be cultivated before drilling since the sensors are sensitive to bigger clods AutoCheck
- Controls seed depth and reports
- Manual adjustment of depth
Note! AutoCheck only available for C-version.
AutoPilot
- It avoids change in drilling depth between full and empty hopper that may otherwise appear due to the weight of the machine
- Field should be cultivated before drilling since the sensors are sensitive to bigger clods AutoPilot
- Checks seeding depth and automatically makes adjustments according to machine height when necessary
Note! AutoPilot only available for C-version. The machine must be equipped with 2 WorkStation 2 units.
Tramlining kit
- Kit for 18m tramlining
- Kit for tramlining on BioDrill BDR 200 and BDR 280
Note! Tramlining for seed and fertiliser output is standard on current model range.
Silage maize boxes
- Maize boxes with double rows
- High speed establishment
- On RDC you use setting 3 of the moveable wall, this leaves 1570 or 2170 litre of fertiliser on 3 and 4m machines
- Variable row distance can be chosen, 37.5, 50 or 75cm
- Fertiliser + micro-granulate can be applied at same time with combi machines at desired row distance and amount
TIP! Use boxes for cover crop bio strip tillage!
Sensor
- Additional hopper level sensor BioDrill to avoid problems of seed moving in hilly conditions
Gear to increase feeding
- Gear to increase feeding 20%
Adjustable seed rate
- Enables variable rate on machines with mechanical metering drive
Coulter protection
- Coulter protection for high stubbles/residues
Grassbox
- Same as BioDrill but for machines with manually operated metering
BioDrill 300 and 400
BDR 300 for RD 300C/S with 300 litres hopper BDR 400 for RD 400C/S with 400 litres hopper
- Allows drilling of small seeds placed in front of packer wheels at the same time as large seeds with row distance 12.5cm
- Hydraulic drive of the seed meter unit and half machine shut-off as standard
- BioDrill can be equipped with tramlining kit. See heading Tramlining kit
Note! When ordering BioDrill WorkStation 2 is required
Microgranulate kit
- Same specifications as the normal BioDrill except that the phosphorus is dropped into metering unit and goes in the seed coulter together with seed
- Switching from phosphorus shute to grass hoses is quickly done by removing the phosphorus shute and adding hoses instead
- Exact placement of phosphorus in autumn is a tillering quality insurance making the farming less weather dependent and increasing the yield potential
- Can be used for insecticides when drilling maize
Following harrow
Mechanical or Hydraulic following harrow
Hydraulic controlled following harrow
- Possible to lift without starting the Gateway or activating the metering system
- Possible to adjust pressure on following harrow on the go
- Possible to pre-set a higher pressure on the headland
Note! New hydraulic system is also available as upgrade for previous models, in production from Seriel no 18736. When ordering hydraulic following harrow WorkStation 2 is required.
Pre emergence markers
- Automatically raised together with machine
- Stabile construction for long time and usage in heavy conditions
- Easy adaptable working angles to varying soil conditions
- Rapid have the programmed option to use the normal marker for pre-emergence marking, disadvantage is disturbance of a drilled seed row
E-Control
Full control at your fingertips
The modern iPad-based control system Väderstad E-Control wirelessly connects to the Väderstad machine enabling full access to its functions and data. You benefit from user-friendly remote setup and calibration, as well as real-time monitoring and control.
