“This added on some nice new features for me“
Accessories Rapid A 400-800S
Hydraulic support stand
- Hydraulic support stand as option to the mechanical support stand, for machines equipped with the hitch drawbar
Gateway + (ISOBUS)
- Possible to upgrade to the most modern control system available on the market, E-Control
- Increases user friendliness and adds functionality
Support wheel
- Support wheels for System Disc are available for Rapid A 600-800S
- Stabilises operation and improves working depth accuracy
- The depth of the wheel can be adjusted by crank handle
Note! Not in combination with wing packer
Track eradicator
- 3 + 3 Agrilla Xtra tines with 25/35 Marathon point
- Levels the field after the wheels creating more even conditions for the seeds
- Can easily be adjusted in height
Note! Not in combination with System Agrilla CrossBoard Light
Disc track eradicator
- Disc eradicator 1 pair (left + right)
- Amount according to tyre dimension
- Levels the field after the wheels creating more even conditions for the seeds
- Depth can be set down to 75mm in steps of 15mm to achieve desired result
Note! Be aware that a disc will not lift the soil in the tracks to the same extent as a tine. Only in combination with System Disc.
Air inlet
- Elevated air inlet
- Reduces dust intake drastically
Foldable distribution head
- Increases accessability in the hopper
Hopper extension
- Increases the capacity with 700 litres reducing amount of stops
- Hopper extension increases the filling height to 3.17m (lifted position)
Note! Only available for 2-point linkages or pivot packer for Rapid A 800S and not in combination with System Agrilla front tool or wing packers!
Maize kit
- Maize head with double rows
- Intensive soil preparation saves passes and moisture
- High speed establishment
- For silage maize
- Variable row distance can be chosen, 37.5, 50 or 75cm
- Fertiliser can be applied at same time with combi machines at desired row distance and amount.
Third axle of seed coulters
- Seed coulters are distributed on three rows instead of two with 12.5cm row spacing
- Improves throughflow in moist conditions
- Not available with CrossBoard, thus requires leveled fields
Hinged top screen
- Hinged top screen of the seed hopper, can easily be folded for accessing the hopper
- The screen prevents large unwanted items entering the hopper with the seed
Spreader plates
- Rear spreader nozzles for slug pellets fitted on following harrow heavy
SeedEye
SeedEye blockage monitoring
- Sensor detect if a blockage or deviation occurs
- E-Control, no extra monitor necessary
SeedEye seed counting
- Every seed counted – always the right amount of seeds/m2
- No more calibration
- License key is needed for seed counting
Note! You need Gateway and E-Control. Remark: Serial number between 17000-17114 also need kit 195767. Fits from year model 16.
Tramlining kit
Extend tramlining with:
- Kit for 36m tramlining
- Kit for closing 2 aditional outputs from distributor head. Apply only to “Flex” type of distributor head
BioDrill
- BDA 360, pneumatic system with 360 litres hopper
- Electrical metering system
- Radar ground speed detection
- Spreader nozzles for broadcasting grass seed in front of OffSet wheels
Note! Only operated with Gateway electronics. * Please observe that 7191002 must also be ordered if the RDAS is equipped with brakes
Wing packer
- Individually suspended and contour following with up to 100kg on each wheel
- Same consolidation for the hole machine width gives improved seed placement particular in light soil
Note! ** Wing packer - not in combination with hopper extension or hitch drawbar *** Not in combination with wing packer since the support wheels are included in the wing packer.
E-Control
Full control at your fingertips
The modern iPad-based control system Väderstad E-Control wirelessly connects to the Väderstad machine enabling full access to its functions and data. You benefit from user-friendly remote setup and calibration, as well as real-time monitoring and control.
